-
We supply wall abutment/internal corner flashings at 3m lengths in a range of sizes. Internal angles are specified at point of order (The most popular internal angle we supply is 90° but we can fold to any angle at no extra charge). We can also make the legs to custom sizes if the size you require is not listed. Wall abutments/internal corners are available in 0.7mm gauge with welted edges to give extra strength and stability. Available in a wide range of sizes, colours and angles -
Trimform Trimline box eaves gutters are produced from pre-coated steel and pre-coated or post coated aluminium, complete with stopends, hopper heads, butt straps, sealants, fasteners and downpipes. Trimline and other gutters are manufactured to order to the customer’s dimensions. -
TF325P-W is a walling profile with the colour side to the broad flat, often referred to as the crest or reverse rolled. -
TF325P-R is a five pan roofing profile for the industrial, commercial, agricultural and leisure sectors.
-
TF324P-L is a walkable liner profile for use within twin skin metal roofing and walling. When fully fixed and sealed, TF325P-L provides the vapour control and air barrier layer. TF325P-L is non-fragile and walkable, acting as a working platform -
TF324P-W is a walling profile with the colour side to the broad flat, often referred to as the crest or reverse rolled. -
TF324P-R is a liner profile for use within insulated roofing and walling systems for the industrial, commercial, agricultural and leisure sectors.
-
TF324P-L is a liner profile for use within insulated roofing and walling systems. -
TF17-1000WL is an economical shallow liner profile for use within roofing and walling. -
Trimform membrane lined insulated Raintite® composite gutters and Raintite® single skin gutters create a fully sealed gutter system and are the ideal solution for rainwater management. -
The Trimapanel® family includes a range of steel faced insulated architectural wall panels, from micro-rib to smooth finishes, providing attractive external aesthetics. -
Formawall® is a smooth faced, secret-fix, insulated wall panel, which is a one fix construction giving a high end architectural appearance. Available in 70mm, 90mm and 120mm insulation thicknesses and bespoke lengths up to 12m to minimise waste and provide U-values down to 0.17 W/m2K. -
Swisspearl corrugated sheets is a high-quality fibre cement product used as roofing and cladding on agricultural and industrial buildings. Fully compressed corrugated sheet is denser than semi compressed alternatives and better able to withstand abrasion and wear. -
Popular on individual and battery garages Swisspearl B5 is a useful product to service the demand for refurbishment and replacement of 3” corrugated sheets on older garages as well as supplying the equine buildings market. -
Steel Sections is one of the leading independent manufacturers of rollformed section with over 40 years experience. Steel Sections offer Zed Purlins, Cee Sections and Eaves Beams manufactured to customers specification, supplied cut to length and fully pierced. Also available is a full range of accessories including Anti-Sag rods, Side Rails, Cleats etc. -
Steel Sections is one of the leading independent manufacturers of rollformed section with over 40 years experience. Steel Sections offer Zed Purlins, Cee Sections and Eaves Beams manufactured to customers specification, supplied cut to length and fully pierced. Also available is a full range of accessories including Anti-Sag rods, Side Rails, Cleats etc. -
Steel Sections is one of the leading independent manufacturers of rollformed section with over 40 years experience. Steel Sections offer Zed Purlins, Cee Sections and Eaves Beams manufactured to customers specification, supplied cut to length and fully pierced. Also available is a full range of accessories including Anti-Sag rods, Side Rails, Cleats etc. -
Steel Sections is one of the leading independent manufacturers of rollformed section with over 40 years experience. Steel Sections offer Zed Purlins, Cee Sections and Eaves Beams manufactured to customers specification, supplied cut to length and fully pierced. Also available is a full range of accessories including Anti-Sag rods, Side Rails, Cleats etc. -
Ridge flashings are used on apex roofs to finish and protect the join along the ridge. We supply standard ridge flashings at 3m lengths in a range of sizes folded to the internal angle to match your roof pitch. 130° internal angle (25° roof pitch) is the most popular ridge flashing we manufacture. Hip flashings are essentially the same as ridge flashings but are used on hipped roofs to finish and protect the join along the hip (where sheets join). -
Over Window Drip Cill (drip sill) flashings are fitted to the bottom of a wall cladding run directly over a door or window to divert water away from the door/window opening. -
Mono ridge flashings are used at the top end of a run of sheets to trim and seal off the edge of a roof. -
Pack Qty: 100pcs Wood Baz Fixings are the most efficient fastener for installing profiled fibre cement sheeting into timber supports. -
Safe-R Framing Board SR/FB is designed for use with steel or timber frame applications up to 11m in height. -
Pack Qty: 100pcs Hex head TEK screws for use with timber purlins -
NyRock Frame Slab 032 is a semi-rigid stone wool insulation slab designed specifically for use between the studwork of external timber or light gauge steel frame walls. -
ROCKWOOL Cladding Roll is a lightweight and non-combustible insulation product, ideal for use in industrial and commercial framed buildings. -
Moulded Coloured Head Stitch Screws with 16mm washer Pack Qty: 100pcs Used for metal on metal fastening to protect against windlift. (e.g. overlapping sheets and sheets to flashings) Custom coloured bi-hex moulded heads - non stock custom manufactured item please allow approx 2 to 4 weeks for delivery. -
Pack Qty: 100pcs A larger diameter stitch screw used for metal on metal fastening to protect against windlift. (e.g. overlapping sheets and sheets to flashings.) Ideal to re stitch through existing holes or fill holes in sheets if they have been moved. -
Pack Qty: 100pcs Hex head TEK screws for use with light gauge (cold rolled) steel (up to 5.7mm thick) -
Pack Qty: 100pcs Light Section Baz Fixings are the most efficient fastener for installing profiled fibre cement sheeting into cold rolled steel up to 3mm Thick. -
Rocksilk® RS80 is a rock mineral wool slab, designed for use in multiple applications, or for fabrication where mechanical characteristics and thermal performance are key. -
Rocksilk® RS60 is a rock mineral wool slab, designed for use in multiple thermal, fire protection and acoustic applications.
LAUNCHING SOONSHIPPING THROUGHOUT THE UK!
Units G &F. Peek House,
Dales Manor Business Park,
Grove Road, Sawston,
Cambridge, CB22 3TJ
Phone: 01223 343 010
Email: info@ajwindustrial.co.uk
COMPANY INFO
PART OF THE AJW GROUP
© Copyright 2026 | All Rights Reserved | Powered by HomeTechWorks