Description
- These self tapping drillscrew allow for easy and quick top fix without the need to pre-drill.
- A Baz fixing features an 8mm hex head with a galvanised washer and rubber doomed sealer washer.
- On the shank of the screw there are specially designed wings which drill out a wider diameter hole to allow for expansion and contraction of the fibre cement sheet.
- Should be fixed through the crown of the sheet profile, not in the valley.
- If you are drilling into steel thinner than 3mm thick (Cold Rolled), you will require a Light Section BAZ Screw instead.
- Available in 120mm to Suit Profile 6 Fibre Cement Sheets, 145mm, 175mm and 200mm Lengths
Additional information
| Length | 120mm, 145mm, 175mm, 200mm |
|---|
- Material – Galvanised
- Available Lengths – 120mm, 145mm, 175mm & 200mm
- Head – 8mm Hex
- Capability – Fixing into steel 3mm to 12mm thick (hot rolled)
- Thread – Expansion wings and gap
- Screw Diameter – 6.3mm
- Weight – Up to 3.2kg per pack
